http://stavcar.cz/ Our offer of machinery and equipment for sale Thu, 11 Mar 2010 05:27:05 +0100 Thu, 11 Mar 2010 05:27:05 +0100 http://blogs.law.harvard.edu/tech/rss PHP 1.0 info@stavcar.com info@stavcar.com http://stavcar.cz/offered-machinery-sz-800x800x4000-3-surface-slideway-grinding-machine-heckert-1098.html HECKERT VEB Aschersleben GERMANY ||| Grinding length: 4000 mm | Grinding height: 800 mm | Grinding width: 800 mm | Total power: 139 kW | Machine weight: 40 500 kg ||| Wed, 03 Mar 2010 10:15:31 +0100 http://stavcar.cz/offered-machinery-sz-800x800x4000-3-surface-slideway-grinding-machine-heckert-1098.html http://stavcar.cz/offered-machinery-xom-2000-10-2a--bending-machine--smeral-1097.html ŠMERAL Brno ||| Working Length: 2050 mm | The greatest thickness of sheet strength 500 MPa: 10 mm | The largest bending angle around the ruler: | -sharp: 120 | -rounded: 180 | The time required for 90 bend: 6 sec. | Adjustability of the jaw: | top - contact: 400 mm | Front - bending: 150 mm | Lower - supporting: 150 mm | The speed of rebuilding the upper jaw: 480 mm.min-1 | Adjustability of the rear stop: 1050 mm | Power to drive the electric bending jaw: 2 x 7,5 kW | to drive the upper jaw: 7,5 kW | to drive the roller table: 2x0, 37 kW | Machine dimensions | -Length: 3790 mm | -Width: 1300 mm | -Height: 2000 mm | working-height: 1100 mm | Machine weight: 12200 kg | ||| Wed, 24 Feb 2010 11:22:28 +0100 http://stavcar.cz/offered-machinery-xom-2000-10-2a--bending-machine--smeral-1097.html http://stavcar.cz/offered-machinery-whn-9-b-horizontal-boring-machine---tos-1096.html TOS Varnsdorf ||| Diameter work spindle: 90 mm | Taper in the work spindle: ISO 40 | Flange diameter hollow spindle: 240 mm | Centre cone diameter hollow spindle: 130/15 mm | Extension work spindle: 680 mm | Speed work spindles in 4 series | -Series 9-90 min-1 | -Series II: 45-224 min-1 | -Series III: 90-450 min-1 | -Series IV: 224-1120 min-1 | Table clamping surface: 1 000 x 1 120 mm | The largest table load: 30 kN | Transverse displacement table: 1 250 mm | Longitudinal displacement table: 1 000 mm | Shifts all groups of machines | low number - smoothly: 2-128 mm.min-1 | a high number - smoothly: 16-3200 mm.min-1 | mikroposuv: 5 mm.min-1 | Rapid traverse: 3200 mm.min-1 | Electric motor to drive spindles: 20 kW | Electric motor to power feed boxes: 3.8 kW | Total input machines: 30 kW | Surface area machines 4180x2300 mm | The height of the machine mm 2690 mm | The necessary surface area: 7 100 x 3 835 mm | Weight: 12 000 kg | Manufacturer: TOS Varnsdorf ||| Thu, 18 Feb 2010 10:27:48 +0100 http://stavcar.cz/offered-machinery-whn-9-b-horizontal-boring-machine---tos-1096.html http://stavcar.cz/offered-machinery-sn-55-b-1500-centre-lathe--tos-1095.html TOS Trenčín ||| Swing over bed: 550 mm | Swing over cross slide: 310 mm | Swing in. Breaking the bed: 800 mm | Width break: 300 mm | Clamping plate seamless diameter: 550 mm | Chuck Diameter: 250 mm | Distance between centers: 1500 mm | Spindle Bore: 71 mm | Taper in spindle: Morse 80 | Cones cylindrical tailstock sleeve: Morse 5 | Stroke cylindrical tailstock sleeve: 240 mm | The largest cross-section of blade: 40x25 mm | Guide screw: diameter x pitch: 48x6 mm | Spindle speed - 16 degrees | -1. series in the range: 10-112 min-1 | -2. series in the range: 90-1000 min-1 | Shifts - 38 degrees | -longitudinal: 0,05-6,4 mm.rev-1 | -lateral: 0,025-3,2 mm.rev-1 | Threads | -29 Metric is rising: 0,5-40 mm | -35 Whitworth záv / 1 80-1 | -26 Module module 0,25-20 | -31 Diametral Pitch DP 2-72 | Electric motor to drive the spindle: 7,5 kW | Machine dimensions: length x width: 3500 x 1440 mm | Machine Weight: 2760 kg | Manufacturer: TOS Trenčín ||| Thu, 18 Feb 2010 10:04:28 +0100 http://stavcar.cz/offered-machinery-sn-55-b-1500-centre-lathe--tos-1095.html http://stavcar.cz/offered-machinery-but-63--3000-cylindrical-grinding-machine-universal--tos-1094.html TOS Hostivař ||| Swing: 630 mm | Distance between centers: 3000 mm | Grinding wheel: diameter x width x hole: 750x100x305 mm | Greatest width of grinding wheel diameter 750 mm: 150 mm | Greatest width composite discs diameter 600 mm: 300 mm | Maximum weight of workpiece 2000 kg | Work Morse Taper Spindle 6 | Kužel.v cylindrical sleeve horse Morse 6 | Chuck Diameter: 315 mm | Grinding spindle speed grades 2 | range: 815, 935 min-1 | Working spindle speed grades 6 | normal range: 9-57 min-1 | Table speed infinitely controllable: 0,05-5 m.min-1 | Transverse movement of the grinding spindle: 420 mm | Rapid changes of the grinding spindle head: 80 mm | Automatic infeed grinding spindle in a stroke on average: 0,01-0,06 mm | Automatic infeed grinding spindle recessing on average: 0,1-3 mm.min-1 | Electric motor grinding spindle: 22 kW | Machine dimensions: 10150 mm Width x Height: 3100x1870 mm | Machine weight: 14500 kg ||| Tue, 16 Feb 2010 08:47:05 +0100 http://stavcar.cz/offered-machinery-but-63--3000-cylindrical-grinding-machine-universal--tos-1094.html http://stavcar.cz/offered-machinery-fgv-40-milling-machine--knee-type--tos-1093.html TOS Olomouc ||| Working table: width x length: 400 x 1600 mm | T-slots: 4 - width x pitch: 18 x 80 mm | Taper in spindle: ISO 50 | Range of revolutions of spindle: 18 degrees- 35,5-1800 min-1 | Feeds: 15 degrees: | - longitudinal and cross: 10-1250 mm.min-1 | -vertical: 2,5-315 mm.min-1 | Dimensions: 3870 x 3610 mm ||| Thu, 11 Feb 2010 12:19:48 +0100 http://stavcar.cz/offered-machinery-fgv-40-milling-machine--knee-type--tos-1093.html http://stavcar.cz/offered-machinery-fgu-80-cnc-universal-milling-bed-machine---strojtos--1092.html ||| Title IVHG 40 / 4 | Taper: ISO 50, DIN 69 871 A | Rotating bodies Title: Vertical and horizontal | Positioning axis B: 90, -90 output | Tool: 20 pc | Number of clamping grooves: 7 | Clamping grooves: width x pitch: 22 x 110 mm | Clamping table area: width x length: 800 x 2 500 mm | Max.weight workpiece: 3 000 kg | Variable spindle speed: 30 - 4 000 rpm-1 | Spindle speed: 4 000 rpm-1 | Scope of work shifts: 0 - 10 000 mm.min-1 | Rapid x, y, z: 20 m / min | Total machine power: 30 kVA ... | Machine dimensions: LxWxH: 5 200 x 3 775 x 3 432 mm | Machine weight: 18 000 kg ||| Universal milling center FGU 80 is designed for a wide range of vertical milling, drilling, boring, and threading operations vystružovacích. Concept machines allows the use of power cutter heads and the use of high-speed spindles. Wide range of spindle speeds allows processing of all types of materials including alloys light metal or alloy steels. The control system, drives and measuring Heidenhain iTNC 530 Thu, 21 Jan 2010 09:36:04 +0100 http://stavcar.cz/offered-machinery-fgu-80-cnc-universal-milling-bed-machine---strojtos--1092.html http://stavcar.cz/offered-machinery-sb-1218-hand-bender-for-sheet--chicago-dreis--krump-1091.html CHICAGO Dreis Krump ||| maximum bending length: 3500 mm | max thickness. bent sheet metal along the length: 2.5 mm 1.25 mm stainless steel ||| Tue, 19 Jan 2010 09:26:44 +0100 http://stavcar.cz/offered-machinery-sb-1218-hand-bender-for-sheet--chicago-dreis--krump-1091.html http://stavcar.cz/offered-machinery-nte-3150-63-table-shears-piesok-1089.html Strojárne Piesok, n. p., Piesok ||| ||| Fri, 04 Dec 2009 08:01:48 +0100 http://stavcar.cz/offered-machinery-nte-3150-63-table-shears-piesok-1089.html http://stavcar.cz/offered-machinery-heidenhain-rod-486--rotary-encoder-rod486-1088.html HEIDENHAIN ||| - 1024 line counts, signal sin 1Vss | - radial 1m cable output, connector 12pin | - power supply 5V/120mA | - new, unused 3 pieces | - weight under 1kg ||| Sat, 14 Nov 2009 09:41:44 +0100 http://stavcar.cz/offered-machinery-heidenhain-rod-486--rotary-encoder-rod486-1088.html http://stavcar.cz/offered-machinery-bdu-250-a--internal-grinding-machine-universal--tos-1087.html České závody motocyklové, Strakonice ||| Diameter holes cut range: 10-250 mm | The greatest length of grinding: 250 mm | The biggest swing: 400 mm | The biggest swing without cover: 470 mm | Swing on a support: 150 mm | The largest longitudinal movement of table: 600 mm | Sleeve diameter grinding spindle: 100 mm | spindle speed 6 degrees in the range: 25-450 min-1 | Grinding spindle speed: 4600-3100 min-1 | Longitudinal displacement of the grinding table: 0,2-6 m.min-1 | the dressing: 0,2-5 m.min-1 | Smallest hand rough infeed: 0,01 mm / dia | Total infeed cycle: 2 mm / diameter | Infeed at dead center: 0,001-0,01 mm / diameter | Infeed grinding at recess: 0,001-0,005 mm / diameter | Machine input: 9 kV | Work spindle rotation: 15 90 90 | Work spindle rotation in the frontal grinding: 15 25 25 | Machine Dimensions Length: 3270 mm | Width: 2020 mm | Machine Weight: 3300 kg ||| Fri, 13 Nov 2009 08:40:25 +0100 http://stavcar.cz/offered-machinery-bdu-250-a--internal-grinding-machine-universal--tos-1087.html http://stavcar.cz/offered-machinery-sinumerik-6ev3-055-0dc--power-supply-unit-sinumerik-1086.html SIEMENS ||| - power supply unit for SINUMERIK control systems | - origial package | - weight 1,5kg ||| Wed, 11 Nov 2009 20:00:37 +0100 http://stavcar.cz/offered-machinery-sinumerik-6ev3-055-0dc--power-supply-unit-sinumerik-1086.html http://stavcar.cz/offered-machinery-pl410b-idnr263371-12--extension-card-i-o-1085.html HEIDENHAIN ||| - extension card of inputs and outputs for the HEIDENHAIN control systems | - supply 24VDC | - 64 inputs, 32 outputs 2A, without analog inputs | - new in original package | - weight 2,5kg ||| Wed, 11 Nov 2009 16:19:17 +0100 http://stavcar.cz/offered-machinery-pl410b-idnr263371-12--extension-card-i-o-1085.html http://stavcar.cz/offered-machinery-exe-660-idnr-257242-01--interpolation-unit-box-exe-660-1084.html HEIDENHAIN ||| - interpolation and digitizer box | - input signal sinus 11uA 11uA / output TTL 5V | - selectable interpolation 25/50/100/200/400-fold | - input 9-pin connectormale M23 | - output 12-pin connectorfemale M23 | - used, dismount from oper.machinery | - weight under 1kg ||| Sat, 07 Nov 2009 09:28:00 +0100 http://stavcar.cz/offered-machinery-exe-660-idnr-257242-01--interpolation-unit-box-exe-660-1084.html http://stavcar.cz/offered-machinery-6fc5503-0ad00-0aa0--machine-control-panel-mcp-for-sinumerik-802c-802s-1083.html SIEMENS ||| - machin cotrol panel without the Total stop button and spindle overide | - with BUS cables | - new, unused | - weight 1,5kg ||| Fri, 06 Nov 2009 22:05:37 +0100 http://stavcar.cz/offered-machinery-6fc5503-0ad00-0aa0--machine-control-panel-mcp-for-sinumerik-802c-802s-1083.html http://stavcar.cz/offered-machinery-6fc5503-0ac00-0aa0--operator-panel-op020-sinumerik-802-c-802s-1082.html SIEMENS ||| - keyboard and LCD monitor | - new, unused | - weight 2kg ||| Fri, 06 Nov 2009 21:52:12 +0100 http://stavcar.cz/offered-machinery-6fc5503-0ac00-0aa0--operator-panel-op020-sinumerik-802-c-802s-1082.html http://stavcar.cz/offered-machinery-sitop-6ep1436-1sl11--ac-dc-power-supply-24vdc-1081.html SIEMENS ||| - input 3x400V AC | - output 24VDC 20A | - used, functional ||| Wed, 04 Nov 2009 19:59:09 +0100 http://stavcar.cz/offered-machinery-sitop-6ep1436-1sl11--ac-dc-power-supply-24vdc-1081.html http://stavcar.cz/offered-machinery-kh-100-p24-facing-lathe--ravensburg-1080.html ||| Diameter rotary front plate: 1800 mm | The through hole in the front-plate diameter: 90 mm | Spindle speed: 0.45 - 180 min-1 | Number of gears: 18 | Swing over bed: 1400 mm | Swing the base plate: 2400 mm | Swing over cross slide: 700 mm | Max.distance the face plate and slide: 800 mm | Height above the floor tool: 1 300 mm | Height tool heads above the base plate: 1 200 mm | The height of the tool head sled: 700 mm | Height above the support tool head: 350 mm | Maximum weight of workpiece: 4 500 kg | Largest torque spindle: 30 000 Nm | Shifts machine - | Longitudinal bed on the motherboard manual-feed: 600 mm | Sleigh bed-hydraulic longitudinal feed: 400 mm | Transverse displacement of the lower sled-hydraulic feed: 800 mm | Cross-shift manual shift slide: 350 mm | Manual feed cone: 200 mm | Feed: 1-170 mm.min-1 | Electric motor to drive the spindle: 38 kW | Machine weight: 19 200 kg | ||| Wed, 28 Oct 2009 13:51:27 +0100 http://stavcar.cz/offered-machinery-kh-100-p24-facing-lathe--ravensburg-1080.html http://stavcar.cz/offered-machinery-dummy-hydraulic-cnc-press-brake-tandem-version--duck-sung-1079.html Duck Sung ||| cap. 600 tons x 12 200 mm, | Delem -control Da 24e ||| Each machine has a separate CNC and can be operated as single unit. Sat, 24 Oct 2009 11:45:33 +0200 http://stavcar.cz/offered-machinery-dummy-hydraulic-cnc-press-brake-tandem-version--duck-sung-1079.html http://stavcar.cz/offered-machinery-len-25-c-a-excentric-press---smeral-1077.html Šmeral Trnava, n.p., Trnava ||| Nominal power: 250 kN | Unloaded: 225 mm | Clamping: 265 mm | Stroke: 8-85 mm | Ram adjustability: 55 mm | Table Size: 560x450 mm | Ram Dimensions: 355x220 mm | Number of strokes: 75/150 min-1 | Usable number of strokes: 40/45 min-1 | Useful work: 400/300 J | El. Engine: 2.2 / 3 kW | Dimensions L x W x H: 1350x1255x2260 mm | Weight: 2700 kg ||| Thu, 15 Oct 2009 11:37:17 +0200 http://stavcar.cz/offered-machinery-len-25-c-a-excentric-press---smeral-1077.html http://stavcar.cz/offered-machinery-vdz-200-cnc-vertical-turning-machine--scherer-feinbau-1073.html SCHERER FEINBAU , Germany ||| Swing: 200 mm | Travels | Z axis: 240 mm | Lateral X-axis: 820 mm 250 570 mm | Height of workpiece including fixture: 275 mm | Spindle diameter in front bearing: 100 mm | Completion spindle taper, DIN 55026: A 5 | Direct driven motor spindle | Rated power 100 ED: 15 kW | Short-term performance 15 min: 21 kW | Rated Mk: 169 Nm | Rated speed: 850 min-1 | Maximum speed: 7 150 min-1 | Rapid | X - axis: 30 m.min-1 | Z - axis: 30 m.min-1 | Machine Weight: 7000 kg ||| control: SINUMERIK 840 C Fri, 18 Sep 2009 11:59:47 +0200 http://stavcar.cz/offered-machinery-vdz-200-cnc-vertical-turning-machine--scherer-feinbau-1073.html http://stavcar.cz/offered-machinery-3x380v-24v-dc-40a--ac-dc-power-supply-24v-dc-1072.html Whrle Industrieelektronik ||| 3x380V/-/24V DC 40A ||| Thu, 10 Sep 2009 09:08:52 +0200 http://stavcar.cz/offered-machinery-3x380v-24v-dc-40a--ac-dc-power-supply-24v-dc-1072.html http://stavcar.cz/offered-machinery-220-570v-110-220v-75kva--transformer-1071.html BrckleSchck ||| PR: 220-570V | SEC: 110-220V 22,7-11,4A, 7,5kVA ||| Thu, 10 Sep 2009 08:54:14 +0200 http://stavcar.cz/offered-machinery-220-570v-110-220v-75kva--transformer-1071.html http://stavcar.cz/offered-machinery-refu-317-42---aaoo--frequency-converter---refu-1069.html REFU Elektronik Metzinger Germany ||| Input/Eingang:3AC 380V, 64A, 50/60Hz | Output/Ausgang:3AC 0-380V, 64/96A, 0-500Hz | Accessories: breaking resistance module, 3f reactor | Project planning manual EN/DE ||| Tue, 08 Sep 2009 08:17:06 +0200 http://stavcar.cz/offered-machinery-refu-317-42---aaoo--frequency-converter---refu-1069.html http://stavcar.cz/offered-machinery-cto-250-4000-hydraulic-press-brake--piesok-1068.html Piesok ||| Nominal force: 2500 kN | Working Table length: 4000 mm | Table width: 200 mm | Ram speed: sjížděcí: 30 mm.s-1 | Mold: 10 mm s-1 | rear: 100 mm s-1 | The biggest ram stroke: 300 mm | Passage between the sidewalls B: 3410 mm | Discharging A: 315 mm | Oblique ram settings: 80 mm | Biggest opening press H: 500 mm | The accuracy of parallel operation of ram: 0.1 / 1000 mm | Working liquid pressure: 23 MPa | Power motor: Main: 22 kW | Assistant 1.1 kW for operating ram: 1,1 kW | Machine dimensions with enclosures: 4900 x Width 1770 mm | height above / below the floor: 3250/850 mm | working height: 800 mm | Machine weight: 20 000 kg ||| Tue, 01 Sep 2009 13:21:35 +0200 http://stavcar.cz/offered-machinery-cto-250-4000-hydraulic-press-brake--piesok-1068.html http://stavcar.cz/offered-machinery-le-160-excentric-press--smeral-1061.html Šmeralovy závody, n.p., Brno ||| Clamping area of table: 1000 x 720 mm | Clamping area of ram: 700 x 380 mm | Ram adjustibility: 100 mm | Ram stroke: 20-120 mm | Number of ram strokes: 45/ min. | Throat: 355 mm | Grip: 330 mm | Thickness of clamping plate: 100 mm | Machine dimensions: 1270x2310x2595 mm | Machine weight: 8700 kg ||| Wed, 29 Jul 2009 09:39:53 +0200 http://stavcar.cz/offered-machinery-le-160-excentric-press--smeral-1061.html http://stavcar.cz/offered-machinery-tewe-6---125-hy-hydraulical-bending-machine--tensol-1059.html Tensol Italy ||| ||| Fri, 24 Jul 2009 08:55:22 +0200 http://stavcar.cz/offered-machinery-tewe-6---125-hy-hydraulical-bending-machine--tensol-1059.html http://stavcar.cz/offered-machinery-1-eo-1215-63-table-shears-with-hydraulic-drive-cmu-1058.html CMU Italy ||| Max. thickness of the sheared sheet strength of 450 MPa: 12.15 mm | Maximum length of sheared plate: 6300 mm | Power consumption: 37 kW | Weight: 42 000 kg | Dimensions: 7500 x 2300 mm, height: 3 250 mm | | ||| Fri, 24 Jul 2009 08:47:56 +0200 http://stavcar.cz/offered-machinery-1-eo-1215-63-table-shears-with-hydraulic-drive-cmu-1058.html http://stavcar.cz/offered-machinery-pkzz-315-2500-drawing-crank-press--erfurt-1057.html Presen -u. Scherenbau Erfurt Germany ||| Nominal press force: 315 t | Working path of ram bottom dead center: 20 mm | Ram stroke: 400 mm | Ram adjustibility: 130 mm | Max drawing depth: 160 mm | Number of strokes ram per minute: 12 | Dimensions of table: 2 500 x 1 400 mm | Dimensions of ram: 2 320 x 1 250 mm | Holder force: 63 t | Ejector force: 10 t ||| Wed, 15 Jul 2009 14:27:31 +0200 http://stavcar.cz/offered-machinery-pkzz-315-2500-drawing-crank-press--erfurt-1057.html http://stavcar.cz/offered-machinery-tnd-360-cnc-lathe--traub-1055.html ||| Working travel: longitudinal: 810 mm | transverse: 205 mm | Turning diameter over bed: 360 mm | Turning lenght: 800 mm | Travelling: 10 000 mm/min | Rapid travelling: 10 000 mm/min | Spindle passage: 60 mm | Spindle r.p.m.: 7 - 3 150 r.p.m. | Grip diameter: 200 mm | Tools magazine: 8 pcs. | Overall power demand: 38 kW | Weight: 2 700 kg ||| Control: CNC TRAUB TX-8D Thu, 25 Jun 2009 11:12:56 +0200 http://stavcar.cz/offered-machinery-tnd-360-cnc-lathe--traub-1055.html http://stavcar.cz/offered-machinery-fgsv-50-ncp-milling-machine-knee-type--tos-1054.html TOS Kuřim ||| ||| Wed, 24 Jun 2009 15:51:46 +0200 http://stavcar.cz/offered-machinery-fgsv-50-ncp-milling-machine-knee-type--tos-1054.html http://stavcar.cz/offered-machinery-er-125-excentric-press--weingarten-1053.html WEINGARTEN Germany ||| Nominal power: 125 t | Number of ram strokes: 50 min-1 | Ram stroke: 20-120 mm | Ram adjustibility: 100 mm ||| Fri, 19 Jun 2009 07:49:58 +0200 http://stavcar.cz/offered-machinery-er-125-excentric-press--weingarten-1053.html http://stavcar.cz/offered-machinery-dummy-vertical-lathe-cnc--emag-1048.html ||| Turning diameter 400 mm | Swing diameter 420 mm | x-Weg 850 mm | z-Weg 315 mm | Recharge 5 sec | Hauptspindelflansch: size 11 | Speed max. 4000 rpm | Main propulsion engine 40 ED: 58 kW | Full performance spindle speed 900 rpm. | Maximum torque 480 Nm | X-axis rapid traverse 45 m / min | Z-axis rapid traverse 30 m / min | Revolver star DIN69880 12fach/fold | Machine weight about 9 t | Dimensions mm 3.380x1.300x3.000 | ||| with Sinumerik 840 D, tool holders, 4 driven tools, chucks, documentation Thu, 16 Apr 2009 12:15:46 +0200 http://stavcar.cz/offered-machinery-dummy-vertical-lathe-cnc--emag-1048.html http://stavcar.cz/offered-machinery-sps-2-25-nc--lathes-semi-automatic---two-spindle--tos--1032.html ||| Height axis spindle management of bed: 325 mm | Max. Swing diameter: 300 mm | Max. working length: 250 500 mm | Max. working material weight: 62 kg | Spindle speed: 20-2800 min-1 | Max. lateral suport stroke: 325 mm | Max. suport longitudinal travel: 800 mm | Chuck diameter: 250 mm | Number of tools in Title 12 | Power of main engine: 32 kVA | Dimensions L x W x H: 4900 x 2450 x 2085 mm | Weight without accessories: 8 410 kg ||| Control system NS 642 C Mon, 16 Feb 2009 07:15:42 +0100 http://stavcar.cz/offered-machinery-sps-2-25-nc--lathes-semi-automatic---two-spindle--tos--1032.html http://stavcar.cz/offered-machinery-p-4500-welding-positioners-inc--rotary-table-1029.html ||| loading capacity: 4 500 kg | offset: 220 mm ||| Fri, 13 Feb 2009 09:17:51 +0100 http://stavcar.cz/offered-machinery-p-4500-welding-positioners-inc--rotary-table-1029.html http://stavcar.cz/offered-machinery-su-100-2000-centre-lathe--tos-1017.html TOS Čelakovice ||| Swing diameter over bed: 1 050 mm | Swing diameter over cross slide: 730 mm | Distance centre: 2000 mm | Drilling spindles: 102 mm | The diameter of the front spindle bearing: 180 mm | Taper in spindle 1:10: 120 mm | Taper center sleeve koníku 1:20: 100 mm | Diameter clamping plates: 1 000 mm | The largest mass of workpiece between centers: 5 000 kg | Top torque to the spindle speed of 14 per minute: 1 250 000 N.m | The largest cutting force: 50 000 N | Spindle speed: | - 24 degrees | -range: 2,24-450 min-1 | Shifts the number of degrees 54 | in the long-range mm / rev 0,08-56 | the extent of cross-mm / rev 0,024-18 | Threads guide screw | -40 Metric to rise: 1-112 mm | -42 Whitworthových Thread: 28-1/4 | -32 Module: module 0,5-28 | -36 Diametral Pitch: 56-1 DP | -36 Circular Pitch 1/16-31/2 CP | Rapid traverse suportu: 3 600 mm.min-1 | Electric motor for the drive headstock: 22 kW | Total power machine: 30 kW | Dimensions: width: 1 970 mm | Length: 4 860 mm | Weight machines: 7 600 kg ||| Mon, 19 Jan 2009 15:26:59 +0100 http://stavcar.cz/offered-machinery-su-100-2000-centre-lathe--tos-1017.html http://stavcar.cz/offered-machinery-bosch-a24v-02--platine-bosch-1013.html BOSCH ||| - outputs 24V DC / 0,2A | - Mat.Nr. 047964-104401 | - NEW, original packing | - weight under 1kg ||| Platine BOSCH A24V/0,2 Mon, 19 Jan 2009 13:30:21 +0100 http://stavcar.cz/offered-machinery-bosch-a24v-02--platine-bosch-1013.html http://stavcar.cz/offered-machinery-bosch-e24v--platine-bosch-1012.html BOSCH ||| - inputs 24V DC | - Mat.Nr. 047961-104401 | - NEW, original packing | - weight under 1kg ||| Platine BOSCH E24V Mon, 19 Jan 2009 13:26:24 +0100 http://stavcar.cz/offered-machinery-bosch-e24v--platine-bosch-1012.html http://stavcar.cz/offered-machinery-bosch-ag-z--platine-bosch-1011.html BOSCH ||| - Bosch PC400/600 | - mat.nr.041523-109401 | - NEW - original packing | - weight under 1kg ||| Platine BOSCH AG/Z Mon, 19 Jan 2009 13:22:55 +0100 http://stavcar.cz/offered-machinery-bosch-ag-z--platine-bosch-1011.html http://stavcar.cz/offered-machinery-heidenhain-pl100b--i-o-platine-1010.html ||| ||| HEIDENHAIN I/O platine PL100B Mon, 19 Jan 2009 13:16:53 +0100 http://stavcar.cz/offered-machinery-heidenhain-pl100b--i-o-platine-1010.html http://stavcar.cz/offered-machinery-klockner-moeller-ps22-8--plc-automat-klockner-moeller---group-1009.html ||| - basis module PS22-8 1x | - power supply module EBE 240A 1x | - outputs module EBE 250A 24VDC/200mA 6x | - inputs module EBE 200 6x | - timer module EBE211 2x | - used, dismount from oper.machinery | - weight 2kg ||| PLC automat KLOCKNER-MOELLER PS22-8 Mon, 19 Jan 2009 11:51:28 +0100 http://stavcar.cz/offered-machinery-klockner-moeller-ps22-8--plc-automat-klockner-moeller---group-1009.html http://stavcar.cz/offered-machinery-tecomat-ns950--plc-automat-tecomat---sestava-1008.html TECO Kolín CZ ||| - basis module NCU - CPM-2S 1x | - outputs module DC CP 3x | - inputs module DC CM 3x | - vizual.unit TXN 054 2202 1x ||| PLC automat TECOMAT NS950 Mon, 19 Jan 2009 11:50:05 +0100 http://stavcar.cz/offered-machinery-tecomat-ns950--plc-automat-tecomat---sestava-1008.html http://stavcar.cz/offered-machinery-simatic-s5-100-cpu-100--plc-automat-siemens---group-1007.html SIEMENS ||| - basis module 1x | - outputs module 6ES5 441-8MA11 3x | - inputs module 6ES5 421-8MA12 4x ||| PLC automat SIMATIC S5-100 CPU 100 Mon, 19 Jan 2009 11:43:03 +0100 http://stavcar.cz/offered-machinery-simatic-s5-100-cpu-100--plc-automat-siemens---group-1007.html http://stavcar.cz/offered-machinery-6sn1145-1ba01-0ba0--power-supply-module-siemens-1005.html ||| - E-R module 16/21kW ||| Power supply module 6SN1145-1BA01-0BA0 Mon, 19 Jan 2009 11:19:17 +0100 http://stavcar.cz/offered-machinery-6sn1145-1ba01-0ba0--power-supply-module-siemens-1005.html http://stavcar.cz/offered-machinery-6sn1123-1aa00-0ca0--servo-controller-siemens--1004.html SIEMENS ||| - LT module 50A with control module ||| Servo Controller SIEMENS 6SN1123-1AA00-0CA0 Mon, 19 Jan 2009 11:10:36 +0100 http://stavcar.cz/offered-machinery-6sn1123-1aa00-0ca0--servo-controller-siemens--1004.html http://stavcar.cz/offered-machinery-tdm-71-015-300-w0-s--servo-controller-indramat--1002.html INDRAMAT ||| - with program.module | MOD21/1X0004-507-932400 ||| Servo controller INDRAMAT TDM 7.1 015-300-W0/S Mon, 19 Jan 2009 10:51:37 +0100 http://stavcar.cz/offered-machinery-tdm-71-015-300-w0-s--servo-controller-indramat--1002.html http://stavcar.cz/offered-machinery-fret--20-x-60-a-plano-milling-machine--tos-1001.html TOS Kuřim ||| Clamping table surface: 2000 x 6 000 mm | Work stroke: 5 - 1000 mm.min-1 | Rapid traverse the table: 4000 mm. min-1 ||| 2 vertical headstocks on the cross Fri, 16 Jan 2009 09:53:36 +0100 http://stavcar.cz/offered-machinery-fret--20-x-60-a-plano-milling-machine--tos-1001.html http://stavcar.cz/offered-machinery-picomax-50-cnc-3-cnc-toolroom--milling-and-drilling-machine--fehlmann-996.html W. FEHLMANN AG ||| Clamping surface of table: 730x280 mm | Travels: | axis X: | - length: 420 mm | - traverse: 1-7000 mm/min | - rapid traverse: 7000 m/min | - min. traverse: 0,001 mm | axis Y: | - length: 240 mm | - traverse: 1-7000 mm/min | - rapid traverse: 7000 m/min | - min. traverse: 0,001 mm | axis Z: | - length: 120 mm | - traverse: 1-3500 mm/min | - rapid traverse: 3500 mm/min | - min. traverse: 0,001 mm | Vertical travel of head: 450 mm | Spindle speed- continuously: 50-9000 rpm | Spindle input: 3,7 kW | Total input: 10 kW | Machine weigth: 1500 kg ||| Control: HEIDENHAIN TNC 150Q Wed, 17 Dec 2008 08:16:47 +0100 http://stavcar.cz/offered-machinery-picomax-50-cnc-3-cnc-toolroom--milling-and-drilling-machine--fehlmann-996.html http://stavcar.cz/offered-machinery-le-160--excentric-press--smeral-990.html Šmeralovy závody, n.p., Brno ||| Clamping area of table: 1000 x 720 mm | Clamping area of ram: 700 x 380 mm | Ram adjustibility: 100 mm | Ram stroke: 20-120 mm | Number of ram strokes: 45/ min. | Throat: 355 mm | Grip: 330 mm | Thickness of clamping plate: 100 mm | Machine dimensions: 1270x2310x2595 mm | Machine weight: 8700 kg ||| Thu, 20 Nov 2008 10:51:17 +0100 http://stavcar.cz/offered-machinery-le-160--excentric-press--smeral-990.html http://stavcar.cz/offered-machinery-g-10-drill-table--ump-987.html UMP Romania ||| ||| Fri, 14 Nov 2008 14:31:45 +0100 http://stavcar.cz/offered-machinery-g-10-drill-table--ump-987.html